Search:

Home / Home


Save Money: Do The Water Removal Process Yourself

By: Beth Olignerf

When disaster strikes and natural calamities are in the offing, you cannot prevent water from entering your house and causing damage. In cases like this, your best bet is to have the water immediately removed from your home. But hiring a water removal company could be costly and maybe you just could not afford to hire one at the moment. You may not have a choice but to do the water removal remediation process by yourself with the help of your entire household members.

The first thing you need to ascertain is how much is the cost of the damage created by the flood water. It is necessary to have proof if you will be filing for an insurance claim. Said proofs must come in the form of pictures which must be taken before the water removal activity happens and after it has been done. This way you have all the necessary basic documentation covered.

The next step for the water removal process is to remove the water that found its way into your home. You could do this by using a wet vacuum pump to haul the water out. If you do not own one, then borrow or rent from someone you know who may have one. Remember that the sooner you could eliminate the water from your property the bigger your chances of salvaging your possessions. Extract water at a moderate and regular pace if the water is more than four feet high. The recommended water extraction volume should only be around two to three feet a day.

After you have been able to remove the water, remove the underlying mud and silt, if there are any. Use a wheelbarrow and large shovels to carry the mud out of your house. When the mud has been reduced to the desired level, use a garden hose to spray off the remaining mud on the floor away from you and towards the drainage. After this has been done, scrub all surfaces with warm clean soapy water to remove the remaining grime, dirt and stains. Rinse the area with clean water using the same garden hose that you used earlier.

With regards to equipment, appliances, furniture and fixture - move them all to a dry and safe location where you could sort and clean them later on.

When you have finished rinsing the flood affected area, dry off excess water by using the wet vacuum pump on the floor and cloth rags on the walls, ceilings and other surfaces. Then put in fans to circulate the air and ventilate the premises. If the temperature outside is sixty degrees Fahrenheit use a dehumidifier to absorb excess moisture and to return warm air that could make drying faster.

If you have soiled carpets ask a professional carpet cleaner to do the work for you because cleaning and disinfecting the carpet on your own may not produce satisfactory results. Besides, you do not have the chemicals and other equipment needed to properly clean, disinfect, deodorize and dry a carpet to do the carpet water removal efficiently.

A water removal activity could be a very taxing job if you do not work methodically and follow the step-by-step procedure as described in a water removal process. Just remember that your main objective should be to remove the water and that everything is dried thoroughly so you can save on time, money, labor and house construction materials.

Article Source: http://www.bluearticles.com


Beth Olignerf shares How To tips and other information for Water Removal and Water Removal Clinton IA

Additional Articles From - Home / Home
Submit Articles
Member Login
Top Authors
Most Popular Articles
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Link to Us
Contact Us
Privacy Policy
Terms of Service


Free Articles
Cooks Recipes