Search:

Home / Home


The Necessity Of The Water Damage Restoration Process

By: Beth Olignerf

Water damage restoration is a procedure implemented once flood water has entered a confined space like your house or basement. The flood water is considered to be very dirty and unsafe since it contains all possible harmful organic materials that could not only destroy your home but could also cause sickness in the process if it is not attended to right away.

Removing flood water from your house is quite a strenuous task without basic knowledge of water damage restoration and having the right equipment to do so. The first thing that you should do is to make an estimate of how much damage has been done. Take pictures and makes notes on what were ruined. Then acquire the necessary cleaning materials and paraphernalia.

For removing the water in a water damage restoration activity, do not use ordinary vacuum since this will not work well in extracting water from your house. Use a wet vacuum pump or a submersible vacuum pump which are really custom made for such situations. The connections of said pumps must be outside the house that is why a long extension cord is needed. Before proceeding make sure that the electrical current within the house is properly shut down.

Hauling out of water by using the wet vacuum pump in performing water damage restoration necessitates making sure that the removable container is checked from time to time in order to throw out the water being seeped out. When the water has been removed or considerably reduced, remove items like furniture, fixture and appliances so you could clean the ceiling, walls and floor properly without being hampered by many things which are also contaminated.

Upon being able to remove all aforementioned items, it is time for the next process of water damage restoration which is brushing all necessary surfaces with warm soapy water to get rid of the dirt, stains and foul smell left by the flood water. After doing the brushing, rinse everything by using clean water. Mop up all spills on the floor.

To remove any remaining pathogenic spores when doing water damage restoration, apply a disinfectant by using chlorine bleach and water. Wipe all affected areas and surfaces with the disinfectant as this would also help reduce the stale or sour odor. Then dry the area by putting in fans and turning on dehumidifiers. Use an air filter to suck out any lingering foul smell. The drying process normally takes a week or more, depending on the size of the area that you are drying and the weather.

Take time to go through the items which you removed from your house, clean appliances, furniture and fixture that you could use again and dispose the others that could no longer be restored. The salvaged items from a water damage restoration activity must also be disinfected by wiping a disinfectant solution on the items with a clean cloth rag. Then allow these items to dry like the area from where it came from. Re-occupation and re-using of all flood affected properties and items must only be done when everything is completely cleaned and dried.

Article Source: http://www.bluearticles.com


Beth Olignerf does writeups for homeowners for Washington DC Water Damage Restoration and Miami Water Damage Restoration